How to setup the printer
- Take off the protective covering.
- Remove the plastic bag
- Lift the printer and move it to the place where it will be installed
Grip the indented area at the base of the printer's sides, as shown. Lift and carry the printer slowly and carefully.
- Remove the tape from the printer body.
- Attach Option Tray and/or Bypass Tray if applicable
- Insert the ink cartridges
- Connect to your wireless network or connect the Ethernet cable
Do not connect the USB cable if you plan on connecting it this way. This will be done during the installation of the printer driver.
- Power the printer on
- The initial ink charge process will start
- Download and install the Sawgrass Print Manager