Sawgrass SG400/800 Adj.Paper Feed
If horizontal lines are printed unaligned, print images are patchy, or black or white streaks are
printed at regular intervals, print a test pattern, and then adjust the paper feed setting.
A test pattern to adjust paper feed is printed.
The optimal adjustment value is the number that appears on the left of the lightest gray square
with straight horizontal lines on both sides. When this number is "+2", the optimal adjustment
value is "+2".
When horizontal lines beside the lightest gray square are broken, select the optimal adjustment value by referring to the lines broken in the opposite direction. When the "+2" square is the lightest gray square and the "+6" horizontal lines are broken in the opposite direct, the optimal adjustment value is between "+3" and "+5". After adjustment, check the adjustment result.
- If black or white streaks still appear after the adjustment, keep adjusting the value by 1 and executing "Adjustment".
- If black streaks appear, increase the adjustment value.
- If white streaks appear, decrease the adjustment value.
- Keep adjusting the value and executing "Adjustment" until the black or white streaks disappear.